| This is the genuine Bernina Foot Control an it fits the Bernina 801-817, 830, 840 ELECTRIC|
This foot pedal fits Bernina models 801, 802, 803, 804, 805, 806, 807, 808, 809, 810, 811, 812, 813, 814, 815, 816, 817, 830, 840.
PLEASE READ THE BOTTOM OF THE PEDAL BEFORE ORDERING - Your cord has to be a 3 prong connector (going into the pedal) AND the foot control needs to have 232 Type or Type 232 printed on the bottom!
Electronic 232 Type Control
3 Pin Connect
Please read type on the bottom cover before ordering.
OEM Part #325.232.041
2/09/2013 - We DO have these in stock right now!.
OEM Part #325.213.14 (325-213-14)
Foot Control pedal for Bernina 830, 213 TYPE (2 PIN CONNECT - 2 Contacts where wire plugs into motor.)
PLEASE READ THE BOTTOM OF THE PEDAL BEFORE ORDERING - This needs to be a 2 prong connector AND it needs to say 213 Type (Type 213)!
Bernina: 707 (Bernina)
Please allow 3-5 business days for shipping to arrive here.
OEM Part #329.221.03
Bernina 830 cord - 3 wire - this cord will ONLY work with the Bernina foot controls that have 3 wires going into them.
This should work with the following Bernina models: 801, 802S, 803S, 801S, 807, 808, 809, 810, 811-819, 830.
Bernina: 801 (Bernina)
Please note that this is a special order item. Please allow 7-10 business days before we can ship.
#62295 - 3pk
Fits the Eureka model 6820
OEM Part #2-066247-001
Metal Royal Uprights - New Style B Bags (Pkg. of 3)
This genuine bag fits all Royal metal upright vacuum models with top fill bags.
This also the same bag as the Hoover B bag for the Hoover Windtunnel.
This bag fits Royal models 673, 673Z, 1018, 1018Z, 1025, 1028, 1028Z, 1030, 1030Z, 1058, 1058Z, 7730, 7730Z, 089000, RY8500, RY8100, RY8200, RY8300 and RY8400, and most models built after 1992.
VacPro Part #RL156+
6" Steel Fire Wall Pipe
For all general purpose sewing of most woven and knit materials.
Can be used in all household sewing machine brands and types for which needles with a flat shank are required.
5 needles per pack
Vibra-Groomer II Brush roll fits most 12" Eureka Sanitaire models:
This is the brush roll with ball bearings, NOT the sleeve bearings.
Including Eureka Model: s677, s648, s647, sc886, sc887, sc888, 1495A, 1923B, 1942B, 2034B, 2034DT, 2034E, 2039AT, 2059A, 2101B, 2122A, 2122B, 2124A, 2134BT, 2134A, 2134DT, 2134ET, 2320B, 2320BT, 2330B, 5049B, 5130B, 5134A, 5134B, 5134A, 5140AT, S649A, S655A
In general if your Eureka's model number begins with 19** or 20** this brush roll will fit.
If you were looking for the Eureka 53398-1, you were redirected to this page. This newer ba;; bearing brush roll is a better brush roll for the same price.
Vac Pro Part #10.804
OEM Part #HA-17
This tension assembly work with the Singer 15 Class sewing machines.
This is a hand-held air-driven turbine brush that is great for stairs, upholstery, etc.
This will most all Eureka, Kenmore (canister), and most all central vacuum systems
Great for cleaning stairs, furniture, and cars. The 5.5-inch wide air driven non-electric beater brush is a must for every home. Also features clamp shell design to easily remove anything that gets jammed in it. Vacuum accessory for central vacuums, canisters, and uprights.
The hose/ wand connector is the standard 1.25 " connector common in the U.S.
The color and style may vary slightly from the picture shown here.
Photo courtesy of Modern Day Mfg.
This is bulk filter material made to replace electrostatic filters.
It is a 3 ply (3 layer) filter material commonly used for protecting the input side of a vacuum cleaner motor (usually located behind or under the paper bags).
This material is sold by the inch and is roughly 1/4" thick.
When you get to the last checkout page, there is a Customer Notes section. Please enter the rough dimensions (example: 5 X 7).
Of course for the above example, you would select 35 for the quantity in the Quantity Pull-Down Menu below.
OEM Part #MC-UG729
This is the Panasonic MCUG729 Platinum Upright Vacuum Cleaner.
This vacuum cleaner has been designed with versatility and ease of use in mind. It comes with an brush roll shut off switch and a bare floor tool.
The automatic height adjustment allows the nozzle to pivot closer to the ground if you are cleaning low pile carpeting or bare floors, which takes the guess work out of manual height adjustment options.
By using a two motor system the machine has a built in overload protector which turns the vacuum off if something is jammed in the agitator, or if there is a clog in the machine. This helps to prevent damage to the belt and the motor. As well, the Quite Force Technology used in this machine pushes the exhaust air through a longer channel before it is expelled, which acts as a muffler to reduce the operating noise of the vacuum.
Many vacuums require you to connect hoses and wands together, or change the setting on the vacuum, to utilize the extension hose and cleaning attachments. However, with Panasonic’s Quick Draw Tool feature you simply lift the hose from its cradle and you can use the supplied attachments for above floor cleaning. This includes the mini turbo nozzle which is the best option for cleaning carpeted stairs, furniture, and upholstery, especially if animal hair is involved. The easy carry handle allows you to bring the machine up and down stairs with comfort, and the easy to release bag compartment makes bag changes a breeze.
Powerful and quite 12amp single speed motor.
On-board tools include dusting brush, long crevice tool, mini turbo nozzle, telescopic wand, and extra extension wand.