Lamb Ametek Vacuum Motor - 116210-85


4.00 lbs
Home & Garden > Household Appliance Accessories > Vacuum Accessories
Market price
Our price
$114.00 (Save 5%)




Lamb Ametek Vacuum Motor - 116210-85

Share this Product

  • Description

  • Related

This is a 2-stage, 5.7 inch, 110-120 volt Lamb Ametek motor.

This motor will fit the Nutone 450, CV-450, CV-450W, 750, CV-750 upper motor with bottom flange.

You may find the motor is stamped with a number 6210.

This motor has 1 7/8 inch flange on the base of the motor.


5.7" wide
97.4" Waterlift
99.1 CFM
304 AirWatts
7.4 Amps @ 110v

You may also need this motor (assuming you have a Nutone built-in).

This is a NEW motor (not used or rebuilt)!

Also is listed as 119407-13, 44331-REB.

Vacpro Part #1995+, MD Part #202N
  • Lamb Ametek Vacuum Motor - 119412

    Lamb Ametek Vacuum Motor - 119412

    This is a 2-stage, 5.7 inch, 110-120 volt Lamb Ametek motor.

    The motor may only say 9412.
    This motor replaces all models all of these motors: 116116, 116474, 116392, 116207, 116210-50.

    Waterlift 81.8", CFM (Airflow) 97, AirWatts 250, Amps 7.5.
    Measurements: base 5.7" wide, hole on base 1.5" wide, Height 6.5"

    Central Vac Motor

    This motor will fit Broan CV-10 and Nutone CV-400 models. This also fits Filtex AirVac AV525, AV525A and many others

    If you want a little more suction than what this motor can generate then look the 116472 motor.

    This motor is used in many machines including the lower motor in a Nutone CV-450 (CV-450W).

    This motor now INCLUDES the separate wire set that most places charge extra or.

    If you have a Nutone system you might also need this motor.

    This motor can be used as a replacement motor for the Lamb 119914-07 and will fit is the VacuFlo FC650.

    This is a NEW motor (not used or rebuilt)!

  • Lamb Ametek 5.7" Motor Gasket - 221

    Lamb Ametek 5.7" Motor Gasket - 221

    When replacing a motor you MIGHT need to replace the gasket.
    Some units have quite differently shaped gaskets that are more functional that must be reused.

    Generally, the gasket is to keep the motor from being metal on metal when bolted in. This will reduce vibration and allow for a better suction seal.

    Also, I should mention that some motor installs do not require a gasket at all and some will use this size, but they might need to be trimmed.

  • Nutone Central Vacuum Bags

    Nutone Central Vacuum Bags

    3-Pack Central Vacuum Paper Bags
    Fits all Nutone 300 and 400 Series Central Vacuum Canisters, Nutone bag 391 and 44186.

    This bag will also fit the FloMaster C650.

    Bag is approximately 26 inches tall.

    Also will fit: AstroVac, Broan, Cyclovac, Dynavac, Easyflo, Eureka, Filteraire, Frigidaire, Housekeeper by Rittenhouse, Husky, Miami Carey, Singer, Smart, Soluvac, Vacuflo 200.

    Broan bag model number: CV10

    Nutone bag model number list:
    350, CV-350, CV-352, CV-353, CV-400, CV-450, CV-550, CV-553, CV-570, CV-653, CV-750,CV-850.

    Also fits Eureka central vac models CV1004B, CV1804B and CV1601M.

    This bag also fits the PowerStar 99193 Optima Plus Central Vacuum, 99190 Genesis Central Vacuum, 99191 Optima Central Vacuum, 99194 Utopia Central Vacuum.
    The part number for the bags for the PowerStar central vacuum systems is listed either as TDSAC93, PS23659, 23659, or PS-23659.

    Nutone Bag 391, 44186 - Replaces 391-8

    VacPro Part #06.436 (6.436)