OEM Part #406ATQ. This wand is a replacement for the older two metal chrome wands that Hayden used to use. The telescopic capability makes it adjustable and easier to use. NOTICE: This wand will NOT fit hoses with "Hayden" embossed on the side of the hose handle but WILL FIT ALL Hayden SuperPack Vacuum Heads.
OEM Part #59157086
Hoover Elite Rewind Model U5507 Crevice Tool 59157086
This is the most common lower wand and cord assembly for Kenmore, Panasonic, Simplicity 8100, and Hayden Central Vacuum Systems.
OEM Part #T3002
This wand measures about 17.5 inches long and it measures about 4 inches from the end of the wand to the female connector for the power nozzle.
Your wand must look the one in the picture.
This also fits Centec CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100 attachment kits.
AE Carter Part #PHM4170L2
804170L - Lower Wand IV-SL Cord
This wand is for the newer Kenmore Canisters and Panasonic 9658 Canister.
A.E. Carter Part #PP99007, OEM Part #AC99PCRXZV06, ESSCO Part #P-50072
This wand is roughly 17.5 inches long, and is a little more than 3.5 inches from the end of the wand to the female connector for the power nozzle.
This also fits the CEN-TEC KN with the Quick Release, P-72424 ELBOW AND EQUIVALENTS.
This is one of the best dry mop dusters that allows you to vacuum your hard floors and mop at the same time!
This tool has hundreds of soft tufts on a 16" wide head. You can reach under furniture and around corners with this great floor tool.
When you're done vacuum moping your floor simply remove the tool from your hose or wand and vacuum the dust around the cloth edges. You can also remove the cloth (held on with Velcro) from the base and throw it in the washing machine. (Extra replacement cloths are sold separately.)
This Manta tool will fit all standard 1-1/4" diameter wands.
These are the replacement cloths for the Manta Hard Floor attachment system.
This 17-1/2 inch wand can also be used in many other systems. The top button hole starts 3/8 inch down and the button nipple starts 1 5/16 inch up from the bottom.
This bare floor attachment tool fits ALL Proteam back pack vacuum cleaners.
This is what we call a fit-all crevice tool. This is the standard 1 1/4" fit-all fitting. Works great for very narrow places such as window tracks, behind the sofa, the carpet along the baseboard edge, and tight places inside the car. PLEASE NOTE: The crevice tool shown may not look quite like the one you receive.
This basic 11-inch air-driven beater brush is a great brush for homes with minimal carpeting.
A better grooming turbo brush would be the TurboCat or the newer Turbocat EX Air driven Carpet Power Nozzle.
The TT27 works with any central vacuum system - or any vacuum cleaner that the wand or hose measures 1 1/4" outer diameter.
Replaces the TK2 (which doesn't have the small vent as you see on the bottom left of this brush).
This is the wand for the most common Kenmore, Panasonic, Simplicity 8100, and Hayden Central Vacuum systems on the market.
Sometimes the plastic pieces on the wand are ivory in color - usually gray.
AE Carter Part #HM4170U2, MD MFG Part #406H
The wand measures 17 1/2-inches long.
The top button hole starts 3/8 inch down from top of wand and the button nipple starts 1 5/16 inch up from the bottom of the wand.
This wand also fits the Sears Kenmore PowerMate #4148753.
Copyright © 1987-2017 VACSEW.COM