OEM Part #911523-03. This is the button lock for the attachment hose for the following Dyson models: DC25, DC27, DC28, DC31, DC33, DC35
OEM Part #919900-39. This is the button lock spring for the attachment hose for the following Dyson models: DC25, DC27, DC28, DC31, DC33, DC35
OEM Part #911710-01 PLEASE NOTE: Dyson has discontinued this belt. We have learned that the belt from Eureka (Eureka 61121) for the s785 models will work just as well as the original belt. This belt is slightly more narrow, but the diameter and teeth count is the same. This is a genuine Dyson DC17 Geared belt. This belt fits all Dyson DC17 models including : Dyson DC17 Animal, DC17 Asthma & Allergy, DC17 Total Clean, and DC17 All Floors. Original part numbers: 11710-01, 11710-01-02, 911710-01, 91171001. A.E. Cart Part #PDY1075 VacPro 09.345 This belt also fits the Eureka Sanitaire 785
OEM Part #904174-01, DY-2000 (DY2000), 920234-01, 904174, 92023401
Dyson generic brushroll assembly. Use with Dyson clutch systems.
Fits DC07 All Floors, DC07 Low Reach, DC07 Animal, DC07 Full Gear, Dyson DC33, DC14 All Floors, DC14 Low Reach, DC14 Animal, DC14 Full Gear, DC14 Full Access, DC14 and DC14 Complete.
Please Note: These brushrolls are now usually shipped in black coloring.
Dyson DC07 Brush Roll, Dyson DC14 Brush roll.
PLEASE NOTE: These roller brushes are now only available in BLACK.
VacPro Part #10.644, DYR-2000
OEM Part #13-DY-02, 900252-04, DY-7500 (DY7500), DYR-7500 (DYR7500) Dyson Clutch Assembly DC07-DC14 for two belt systems. Fits DC07 All Floors, DC07 Low Reach, DC07 Animal, DC07 Full Gear, DC14 All Floors, DC14 Low Reach, DC14 Animal, DC14 Full Gear, DC14 Full Access, DC14 and DC14 Complete. ESSCO Part #DYR-7500
OEM Part # 904125-51. Dyson vacuum hose for Dyson DC07 series vacuum cleaners. Made to match the color on the DC07 All Floors, but fits all DC07 models including DC07 All Floors, DC07 Low Reach, DC07 Animal, DC07 Full Gear. Original Dyson part numbers have included the following 904125-14, 904125-51, 911862-10, DYR-4000, 10-1100-0, 10-1102-083, DYR-4000, and DYR-4001. This hose is available in YELLOW as well as PURPLE - if you prefer the purple just indicate that on the checkout page in the comments section.
OEM Part #10-2306-02
This filter is WASHABLE but must be fully dried off before putting it back in to the machine. Filters particles as small as cigarette smoke.
Filter should be washed at least once every six months.
For use with DC07 (DC-07).
A.E. Carter Part #PDY823
OEM Part #10-2315-95
Dyson DC17 Post HEPA Filter
OEM Part #904219-02
This is the replacement internal nozzle hose for a lot of the Dyson uprights.
This short hose is located on the underside of the machine (behind the front brush roll nozzle) - it is NOT the main hose on the rear of the vacuum.
Fits Dyson Models: DCO7 All Floors, DC07 Low Reach, DC07 Animal, DC07 Full Gear, DC07 Pink, DC07 Original, DC14 All Floors, DC14 Low Reach, DC14 Total Clean, DC14 Drive, DC14 Full Kit, DC14 Animal, DC14 Full Gear, DC14 Full Access and DC14 Complete
Replacement Part #HSE102, 012316, PDY7200, DYR7200
NOTE: These new hoses are a slightly smaller threading than the original one and are VERY tight to put on.
VacPro Part #19.577
OEM Part #902312-54, 902312, 15902312-16, 902312-26, 902312-69. This is the brush roll nozzle housing that holds the brush roll housing for the Dyson DC07 and Dyson DC14.
Copyright © 1987-2017 VACSEW.COM