OEM Part #38718013
This suction valve door fits the Hoover U6625, 6630900, U6630-900, U6643-900, U6634900, UH60000, UH60010, U6634-900
This wand will fit all Hoover uprights and Hoover bag-less canisters that have 1 1/4" wands at the attachment end of the wand.
This wand measures about 16.5" long and are sold individually.
OEM Part #38634078
Hoover Wand - OEM Part #43453043 This attachment wand is commonly used with the old Hoover Porta-Power canister system as well as many other canister models.
ORIGINAL HOOVER EXTENSION-WAND 20-INCH CHROME WITH-PIN
Hoover Metal Wand w/Cord Clip (43453052) Original Hoover Part
OEM Part #36433191
This is the upper wand holder for the Hoover Empower U5269-900. This part may also fit other models.
This is the front wheel assembly for the Hoover Breath Easy Upright.
Does NOT fit the Windtunnel bag-less models - It fits Hoover model # U5256-900.
VacPro Part #64.749
OEM Part #43434247, 440007333, 40200024, 43434042. This is the attachment hose for the Hoover WindTunnel. This hose fits the Hoover U6425-900, U6445-900, U6446-900, U64498-900, U6451-900, U6455-900 as well as many other models. This is the Deluxe Stretch Hose, 7-Foot. NOTE: The original version of this hose would stretch out to 20'. Unfortunately, that hose is no longer available.
OEM Part #40309034, old Part #40309026
Bottom Plate or rug plate for the Hoover models U5014-900, U5016-900, U5018-900, U5019-900, U5170-900, U5171-900, U5173-900, U5173-900, U5173-950, U5174-900, U5175-900, U5176-900, U5176-950, U5177-900, U5347-900, U5347-960, U5348-900, U5348-911, U5349-900, U5361-900, U5361-960, U5363-900, U5365-900, U5396-900, U5397-900, U5398-900, U5420-900, U5421-9RM, U5436-950, U5443-900, U5443-940, U5445-900, U5445-940, U5446-900, U5446-960, U5446-990, U5447-900, U5449-940, U5450-900, U5451-900, U5452-900, U5453-900, U5454-900, U5456-900, U5457-900, U5458-900, U5459-900, U5464-900, U5465-906, U5465-909, U5465-916, U5469-910, U5475-900, U5477-900, U5700-9RM, U5720-900, U5720-990, U5721-900, U5722-900, U5723-900, U5725-900, U5750-900, U5750-906, U5750-911, U5750-980, U5751-900, U5752-900, U5753-900, U5753-960, U5755-900, U5756-900, U5757-900, U5758-900, U5759-900, U5761-900, U5762-900, U5763-900, U5765-900, U5767-900, U5769-900..
Sometimes the plate says P/N 37245-009, and the tray might have 37243-024 on it.
Blakemans Part #1726+
This kit replaces 40309025, 40309026
OEM Part #37249035, #37249055, 372479095
Genuine Hoover WindTunnel Dirt Cup Lid fits models U8120-900, U8122-900, U8126-900, U8130-900, U8134-900, U8140-900, U8142-900, U8146-900 and U8148-900, U8143-900
You will also probably need to purchase the cap for this item.
OEM Part #38781053.
Also Known as Agitator Pulley Seal.
There are 4 felt washers in 1 set.
Hoover WindTunnel Primary Filter.
Fits inside the bag chamber below the paper bag.
This filter measures 5" x 2 3/16" x 3/8" with a rectangle notched out of the one corner.
While initially green as shown, it is now white in color. This filter has replaced the Layered WindTunnel Primary Filter #38765023.
AE Cart #HV4215
OEM Part #40110009
This filter will fit all Bagless WindTunnel V2, Dual V, and Savvy Upright Vacuum Cleaners.
40110004, 40110006, 4011000: Fits model No. U5453 900, Hoover bagless, and WindTunnel, U6630 900, U6616 900, U5750 900, and self propelled and bagless WindTunnel uprights, 2 filters per box VacPro part #06.819
Copyright © 1987-2017 VACSEW.COM