This is a complete attachment system featuring the newest air driven power-head (TurboCat Zoom - EX) on the market.
Comes with all the above items including a 30ft low voltage hose with a built-in switch in the handle to turn the system on and off.
The hose has a 360 degree swivel and is crushproof.
30ft Deluxe Kit with TurboCat EX Brush - Friction Fit.
This picture of the TurboCat above is not the correct power head. Note the picture of the Turbo EX Head - this is the head that is included.
OEM Part #416Z
This is a complete attachment system featuring the newest air driven powerhead (TurboCat Zoom - EZ) on the market.
Comes with all the above items including a 35ft low voltage hose with a built-in switch in the handle to turn the system on and off.
The hose has a 360 degree swivel and is crushproof.
35ft Deluxe Kit with TurboCat Zoom Brush - Friction Fit
The picture of the TurboCat above is not the correct power head. Note the picture of the Turbo EX Head - this is the head that is included.
OEM Part #352CO This is a hose conversion kit and replacement kit. Replaces the two prong direct connect assembly or an existing broken cord assembly on electric hoses with an electrical cord on the wall end. Includes one cuffs, cord (with molded-in fuse), one male pin connection, one female slate connection (older hoses have two male pins and will need to be converted using the female slate connection - splice it into one of the wires from the hose under the cuff). Here is a link to a video that will give you an idea on how to replace these parts.
CentraMop Attachment - Fits all central vacuum systems - 402CM
If you were looking for a way to both damp-mop your hard floors and vacuum at the same time this tool is what you need!
The CentraMop Combines both central vacuum suction and 'Swiffer' type mopping
This attachment washes and vacuums the floor simultaneously. The vacuum captures lose debris as the damp mop picks up tougher to remove dirt and grime.
Cleans in both forward and reverse directions. CentraMop's unique front and rear vacuum channels pick-up debris whether pushing or pulling.
'Swiffer' type Cleaning Pads. Easy to install and remove, the CentraMop incorporates the use of regular store bought cleaning pads, but we highly sugges the Clorox ReadyMop, it fits best.
MicroFiber Cleaning Pad: The easy-to-wet, install, and remove cloth saves money over single-use disposable pads and does not streak on wood and laminate floors. The CentraMop avoids pushing dirty water into the tile grout and is specifically designed to work with all wood floor cleaners.
OEM Part #513F
This is a collapsible ring made by 3M. This fire stop ring will fit over the pipe and collapses the PVC pipe and wire when heated from a fire.
Some inspectors will require using one on each side of the wall in some applications.
Also known as a firestop collar
This motor is a 3-stage, 5.7 inch, 110 volt Lamb Ametek motor.
The motor may only say 6765. It also might have a dash and numbers.
Replaces 116565, 116565.
Waterlift 136", CFM 95, AirWatts 465, Amps 13.1.
This motor fits the MD G23, as well as many other central vacuum systems including the Electrolux Aerus 1580, 1590, ECV1590A, E177A, E117A, Afuera (by Beam), and some Centralux models.
This motor fits the Hayden SuperVac 6000 and the Hoover S5567-011, S5569-011, S5573-011, S5620 , S5630, S5673, S5675.
It also fits Eureka Eureka CV1801H., CV1001 TYPE A, CV918, CV918A, CV918B, CV918D, Eureka Boss CV1801, CV1801A, CV1801B, CV1801D, CV1801G, CV1820, CV1810, CV1810A, CV1810B, CV1810D, CV1810G
This is a NEW Lamb-Ametek GENUINE OEM motor (not used or rebuilt)!
Metal Mounting Bracket with Spigot
Stud Plate - Steel stud plate
Use if you need to vent system outside or keep critters from getting inside.
This will only fit the standard 2" OD (Vacuum PVC Pipe). Overall size is 3-5/8"w X 4-5/8"h.
OEM Part #352GS Replaces the 3-way switch assembly in hose handles for central vacuum electric hoses made by Plastiflex. The circuit board measures about 2.25 inches in length with each of the contacts measuring about 1/2 inches apart. All Plastiflex hoses have a "P" within a circle molded into the end of the cuff at the end of the hose where it plugs into the wall. Most all hoses on the market made within the last 10 years or so are made by Plastiflex. You might have something from Wessel EBK340 & EBK360, Stealth, Ace, Beam, Nutone, Vacuflo, AirVac, Filtex, and M&S, to name a few. Alternative Part #HDSHCBEZHR01
Tapered hose cuff for all Filtex central vacuum hoses that plug into the Filtex metal inlets - 302CT. This tapered cuff screws onto straight suction hoses (Ones that do not have a switch on the handle). It will then fit into inlet valves slightly larger than 1.5 inches in diameter. (Filtex, AstroVac, and others). This cuff will not work with valves with two metal contact points in the valve neck. Tapers from 1 5/8" down to 1 1/2".
Complete accessory kit with 30' low voltage hose. This kit includes the air-powered, basic grooming, TT27 - the original central vacuum standard in air-driven carpet beater brushes.
The kit is compatible with your central vacuum (1.5 inch diameter wall inlet holes)
This kit come with the pictured TT27 air driven nozzle and PLASTIC wands, not the metals shown AND the hose is a NON switched style of hose.
If you would rather have a hose with the switch, then click here.
30ft Stealth Attachment Kit, Direct Connect Electric Prong Hose - 423G30
This is the best electric power brush and 30FT central vacuum hose on the market today.
The power nozzle is made by Lindhaus and we have been selling it for over 10 years. We have never had one of these power heads fail for ANY reason!
You simply plug the hose end with two small male 110 volt connection prongs directly into electrified inlet valves. Comes with all the attachments you see in the picture.
This attachment system is compatible with all central vacuum built-in systems with around 1.5 inch diameter vacuum wall valves.
Photo courtesy of MD Manufacturing
Copyright © 1987-2017 VACSEW.COM