Modern Day

Modern Day
Modern Day / FloMaster / Silent Master MD Manufacturing Central Vacuum Systems, based in Southern California, was founded in 1961 and has become one of the largest central vacuum manufacturers supplying the entire United States and almost 50 other countries. Our number one passion is, and has always been, the central vacuum industry. Over the past 4 decades we have learned a tremendous amount about all aspects of central vacuums, cleaning dynamics, product engineering, and homeowner’s needs. In 1995 we opened up our knowledge base to the entire world through the internet. As a result, tens of thousands of home owners have updated their older vacuums and now live in a cleaner environment. Our goal is not to have the cheapest products in your home or on the internet. We pride ourselves in manufacturing and selling high quality goods and providing accurate, first-rate customer service. Here is the voice of one client that represents the daily feedback we receive:

http://builtinvacuum.com/

Products


  • Airvac 8x8 Foam Filter - 730AVFL

    Airvac 8x8 Foam Filter - 730AVFL

    Foam Filter 8x8 inch (8" X 8") with about a 2-inch diameter center hole.

    Fits M and S, M & S, AirVac, Air Vac models including VM212, AV550, AV550A, AV850, VM601, some VM180, and Vacumaid models. It also fits the Electrolux E130F

    Be sure to measure your old filter! This filter is 8" X 8".
    If your filter measures 6" X 6" then you need this filter.

    SKU16746
    $79.00
    $87.00 save 9%
  • Bare Floor Tool - 10.5" Wide - FABF-10

    Bare Floor Tool - 10.5" Wide - FABF-10

    This is a fit-all bare floor tool with vinyl wheel and a natural bristle brush.

    This tool is 10.5 inches (10.5") wide.

    This tool will fit most all Eureka, Kenmore, Dirt Devil, Fuller Brush, as well as most all central vacuum (built-in vacuum) systems.

    Fits Hoover uprights and Hoover bagless canisters which have 1 1/4" wands where the attachments fit OVER the wand or hose. Replaces part #43414142.

    NOTE: This will NOT fit the Hoover Duros Canister.

    PLEASE NOTE: Sometimes this bare floor tool is shipped out in gray or cream colored.

    SKU17326
    $19.95
    $24.95 save 20%
  • Bare Floor Tool - 14" Wide - 402WX

    Bare Floor Tool - 14" Wide - 402WX

    This is a fit-all (1 1/4") bare floor tool with vinyl wheels and a natural bristle brush.

    This tool is 14 inches (14") wide.

    This tool will fit most all Eureka, Kenmore, Dirt Devil, Fuller Brush, as well as most all central vacuum (built-in vacuum) systems.

    NOTE: Sometimes we get this tool in gray, ivory, and white.

    SKU17327
    $24.95
    $29.95 save 17%
  • Belt TurboCat, II, Plus, TL-2000, TP-210, T-210 - 45519

    Belt TurboCat, II, Plus, TL-2000, TP-210, T-210 - 45519

    Cogged belt is 9/32" wide, 6 1/16" long when flattened on itself, and the distance from cog peak to cog peak is 1/8".

    TP210 Belt

    This belt fits the TurboCat, Turbocat II (TurboCat 2), TL-2000, TP210, T-210.

    SKU16881
    $6.95
    $7.95 save 13%
  • BlackHawk Belt - 46506

    BlackHawk Belt - 46506

    OEM Part #46506

    This belt fits the Black Hawk, Cen-Tec CT-110, Centec CT110, power nozzle.

    The power brush has NO headlight or see-through window to the roller bar.

    This belt is 3-inch diameter circle by 1/2 inch wide, smooth, with no cogs.

    SKU17592
    $6.00
    $7.00 save 14%
  • BlackHawk II Belt - 466BL

    BlackHawk II Belt - 466BL

    OEM Part #466BL

    This belt fits BlackHawk II power nozzles including: EHA-PB12 and AirVac.

    The power brush has a see-through window to the roller bar.

    Belt is 3-3/4 inch when flattened on itself, by 5/8 inch wide, smooth, no cogs. It is 2-1/2 inches in diameter when in the shape of a circle.

    This belt also fits the Nutone 398, Nutone 598, and Nutone 599 Vacuum.

    These belts are sold individually.

    SKU17591
    $7.00
    $9.95 save 30%
  • Carpet Rake with Pole - AB24

    Carpet Rake with Pole - AB24

    OEM Part #FA-5665, AB24.

    This carpet rake measures a full 18" wide and includes the handle - made by GRANDI GROOM.

    If you would rather have a rake that can hook up to your vacuum cleaner, then click here.

    ESSCO Part #FA-5665

    Please Note - Because of the unusual shipping dimensions, your being charged a much higher rate on shipping than the package actually weighs.

    SKU18811
    $49.95
    $59.95 save 17%
  • Central Vacuum Motor Circuit Board Dual Motor 28 amp 120v - 235L

    Central Vacuum Motor Circuit Board Dual Motor 28 amp 120v - 235L

    Vacuum Motor Circuit Board Dual Motor 28 amp 120v Circuit board is 2" high from board to top of reset button. The reset buttons and low voltage stem are threaded and attach through the vacuum unit's corresponding holes that are made for this circuit board.

    Fits Modern Day Silent Master Model S5

    SKU16899
    $69.50
    $89.95 save 23%
  • Central Vacuum Motor Circuit Board Single Motor 15amp 120v - 235S

    Central Vacuum Motor Circuit Board Single Motor 15amp 120v - 235S

    OEM Part #235S.

    This is the relay board for most 120v 15a central vacuums made by Modern Day, Silent Master, Central Vac International and some Electrolux central vacuum systems.

    The circuit board has the relay, transformer, mini breaker, and two pairs of low voltage leads.

    This board works on all SilentMaster, MD, and FloMaster models with ONE motor AND using
    less than 15a @120v - made after 08-2004.

    SKU18367
    $47.80
    $59.95 save 20%
  • Central Vacuum RF Remote Control Key Fob - 145KT

    Central Vacuum RF Remote Control Key Fob - 145KT

    Key fob remote for our central vacuum wireless controller.

    Program by holding key fob button for 3 seconds, release; press and release the button on receiver once. Press the key fob button once and the vacuum will turn on. Press it again to turn it off.

    SKU18197
    $59.95
    $69.95 save 14%
  • Central Vacuum System Remote Control (RF) - 145

    Central Vacuum System Remote Control (RF) - 145

    OEM Part # 145.

    This is the radio frequency (RF) remote control for your built-in central vacuum system.

    This is the easiest way to bypass damaged low voltage wiring and remotely start the vacuum unit from within the home. Simply attach remote on the vacuum hose handle and other components near the vacuum power unit. And surprise - your low voltage troubles are over. Range is similar to a car's remote lock/unlock device used with most cars today.

    Wireless Controller Kit includes 1 LV7 controller, 1 plug-in wall adapter and 1 hand-held key fob transmitter.

    Controls the on/off function of the central vacuum unit without requiring any wires. Will operate with any new or existing central vacuum unit. Eliminates all low-voltage wiring required for central vacuum installations. Immune to vacuum motor interference. Automatic shut-off after 30 minutes. Receiver unit programs up to 4 transmitters. Configuration of receiver makes replacement transmitters easy to reprogram.

    Manufactured by Allutron

    Here is the instruction sheet.

    SKU16555
    $214.00
    $224.95 save 5%
  • Central Vacuum Zippered Hose Sock Cover - 30' long - 370PZ

    Central Vacuum Zippered Hose Sock Cover - 30' long - 370PZ

    30' Hose Sock manufactured by VacSoc - This will protect your base boards and furniture.

    This is a nice quality quilted, zippered sock approximately 30' long. This protective hose sock covers the central vacuum hose and protects the hose as well as your walls and furniture.

    The hose sock can be ordered in blue (as pictured) or in grey. If you would like grey, just let us know on the last checkout page in the Comments Box.

    Fits over hoses 30' long.

    * Machine Washable
    * Easy to Install & Uninstall
    * 2-Year Warranty
    * Fully Padded
    SKU16992
    $49.95
    $59.95 save 17%

Manufacturers