Royal Appliance Mfg Co.

Royal Appliance Mfg Co.
The first Royal vacuum cleaners were made by the P.A. Geier Company in 1905. This makes us one of the world´s oldest vacuum cleaner manufacturing companies. Mr. Geier started producing his metal cleaners by hand in a backyard garage in Cleveland, Ohio. Soon the company grew and moved to a four-story building on 105th Street where it operated two divisions, a cleaner division and a machining division. Besides vacuum cleaners, the company produced mixers, hair dryers and washing machine units. Vacuum cleaners, though, remained the key product, as the company introduced the industry´s first hand-held vac, the "Royal Prince," in 1937. Royal joined most manufacturing companies across the country and switched over to military production during World War II. Vacuum cleaner shipments remained strong up to 1953 when the P.A. Geier Company was bought by an investment group, the Walter E. Schott Organization. The Schotts renamed the company Royal Appliance Manufacturing. However, the new owners were not wholly committed to the company and decided to dissolve it soon after its acquisition. Royal was then purchased by a group of employees, headed by Stan Erbor, in 1954. The company thrived under Erbor´s leadership, moving to Highland Heights, Ohio in 1969 where it expanded and refined all phases of operations. Erbor was active in the company until his death in 1981 at age 80.

Products


  • Royal Rod Spring - 1003009000

    Royal Rod Spring - 1003009000

    OEM Part #1003009000.

    This is the Rod Spring for the Royal models: 2025, 2028, 4000, 4008, 9961, 9700, M9700, 97001 and others.

    SKU18350
    $0.49
     
  • Royal Style "A" Bags - 9 pack - 3-672075-001

    Royal Style "A" Bags - 9 pack - 3-672075-001

    This is a replacement bag for the Royal style A paper bags.

    These bags come 9 in a pack and are the same exact bag as the Eureka F & G Bags.

    The advantage of purchasing these bags is that they have a higher filtration rating than the standard original Royal A bags.

    Alternate part #3088147001.

    SKU16374
    $10.95
    $17.95 save 39%
  • Royal Upright Belt - "Knurled" - 1-672260-001

    Royal Upright Belt - "Knurled" - 1-672260-001

    New Style OEM Part #1-672260-001.

    This belt will fit all models made after 1996. The brushroll should have HEXAGON end caps.

    The inside of the belt will have a textured surface - hence the "knurled" description.

    These belts are sold 2 per pack.

    If the belt does not match the above description then try this belt instead.

    SKU16528
    $5.00
    $6.95 save 28%
  • Royal Upright Belt - "Older Style" - 1-044260-001

    Royal Upright Belt - "Older Style" - 1-044260-001

    Old Style - OEM Part #1-044260-001

    Fits most models made prior to 1996. The brushroll should have SQUARE end caps.

    Some of the model numbers that this belt fits: Royal 880, Royal 881, Royal 883, Royal 885. There are more models as well.

    These belts are sold 2 per package.

    If your brush roll has a hexagonal end cap, then you will need this belt instead.

    SKU16527
    $5.00
    $6.95 save 28%
  • Royal Upright Brush Roll - Hex End - 2-655225-000

    Royal Upright Brush Roll - Hex End - 2-655225-000

    OEM Part #2-655225-000, 2655225000

    This brush roll fits 655, 656, 882, 7510, 1010, 2000, 360, 361, 670, 671, 672, 673, 885, 886, 886F, 994, 1020, 1025, 1028, 1028Z, 1030, 1030Z, 1038, 1038Z, 1040, 2000, 2008, 2025, 2028, 3000, 30008, 6103, 6103F, 7700, 7710, 7720, 7730, RY8100, RY8200, 89130C, 89135C, 89137, UR38200, CR5130, 9100 and 089000.

    This is the standard 12" (12 inch) roller brush length.

    Be sure to examine the end-cap on your old brush before ordering.

    Also royal part #2673273000.

    SKU17038
    $39.95
    $44.95 save 11%
  • Royal Upright Brush Roll - Hex End - With Stiffener - 2-673273-000

    Royal Upright Brush Roll - Hex End - With Stiffener - 2-673273-000

    OEM Part #2-673273-000

    This roller brush fits models 670, 671, 673, 885, 886, 994, 1020, 1030, 1040 2025, 3000, 6103, 7700, 7710, 7730, 9100, 89130, 89130C.

    Be sure to examine the end-cap on your old brush before ordering - It should be a HEX end.

    NOTE (5/23/2015) : These brush rolls are no longer being manufactured.
    Please use this one instead: 2-655225-000

    Royal did a running change on this brush roll in that it longer has the metal rings with brush strips. The brush roll now has wood ridge with tufts implanted into the wood dowel.

    SKU17039
    $39.95
    $44.95 save 11%
  • Royal Upright Brush Roll - Square End - 2-675221-000

    Royal Upright Brush Roll - Square End - 2-675221-000

    OEM Part #2-675221-000

    This brush roll fits the Royal 14" upright models.

    Service Brush Roll - Now with ball bearing. Replaces older sleeve bearing brush rolls.

    Fits models 880, 884, 885, 886 and all older models made prior to 1992. This brush roll will also fit some Royal 9000 series models as well.

    Be sure to examine the end-cap on your old brush before ordering.

    This brush roll will fit the Royal 880, 881, 882, 883, 884, 885, 886, 887, 990, 992, 994, and many others.

    VacPro Part #10.182, AE Carter Part #675221

    SKU17037
    $39.95
    $43.95 save 9%
  • Royal Upright Fan - Slip-On - 1-608005-000

    Royal Upright Fan - Slip-On - 1-608005-000

    OEM Part #1-608005-000 (1608005000).

    Metal Fan(Slip-on)Royal Upright.

    This fan fits ALL older metal Royal upright vacuum cleaners that have the SLIP-ON (Slip on) impeller (fan) system.

    Metal replacement fan for Royal Metal upright vacuums Models: 1010,1018, 1020, 1025, 1028Z, 1030,1038, 1040, 1058, 2000, 2008, 2025, 2028, 2075, 2078, 4000, 4008, 89130, 89130C, 89135, 89137, 9961, 089000, RY8100, RY8200, RY8200, RY8400, CR5128Z, CR5158, CR5130.

    A.E. Carter Part #PRY608005
    SKU17336
    $49.95
    $59.95 save 17%
  • Royal Upright Fan - Small Thread - 1-053004-000

    Royal Upright Fan - Small Thread - 1-053004-000

    This fan fits all older metal Royal upright vacuum cleaners that have the small threaded impeller (fan) system.

    Thread-on 7/32" (small hole).

    This would include the 880, 680, 881, 882 models.

    Blk Part #RL68+

    There are limited quantities available.

    SKU17340
    $69.95
    $89.95 save 22%
  • Royal Upright Motor - Drop In - 2870114000

    Royal Upright Motor - Drop In - 2870114000

    OEM Part #2870114000, 2-870114-000.

    This is the 10a motor for all metal Royal Upright vacuum cleaner models that use the Drop-In style motor.

    This motor will fit the Royal 1030D & Royal 89130C.

    SKU19147
    $119.95
    $169.95 save 29%
  • Royal Wheel Fork - 2-670007-000

    Royal Wheel Fork - 2-670007-000

    This is the rear wheel fork for the upright Royal 1018, 1018x, 1025, 1028, 1028z, 1030, 1030z, 1038, 1038z, 1058, 1058z, 089000

    It is Item #35 in the picture.

    VacPro Part #74.070

    SKU18190
    $15.95
    $19.95 save 20%
  • Royal Style "B" Microfresh Bags - 3-671075-001

    Royal Style "B" Microfresh Bags - 3-671075-001

    This is a package of 3 bags of the "Micro Fresh" Style B Bags for the metal Royal upright vacuum cleaners using the Style B bags.

    This bag is a higher filtration paper material than what you would get from the standard bags.

    SKU16376
    $8.95
    $9.95 save 10%

Manufacturers