OEM Part 12HFB-SBB
This bare floor tool will fit all Riccar and Simplicity Canister vacuums.
This tool requires that the wand or hose has a button lock.
This tool measures 12" wide.
This will fit the Simplicity S24, S36, S38, Verve, Riccar RC-1700, RC-1800 and other models.
This is bulk filter material made to replace electrostatic filters. NOTE: This filter material is no longer available as a tri-color material. Typically it will be a solid green or white in color. This is bulk filter material commonly used for protecting the input side of a vacuum cleaner motor (usually located behind or under the paper bags). This material is sold by the inch and is roughly 1/4" thick. When you get to the last checkout page, there is a Customer Notes section. Please enter the rough dimensions (example: 5 X 7). Of course for the above example, you would select 35 for the quantity in the Quantity Pull-Down Menu below.
OEM Part Old #L25 - New #A72 This carbon brush fits all the Riccar 8000 series models as well as all of the Simplicity 7000 series models. 7 Series - models 7700, 7750, 7850
7000 Series - models 7200, 7250, 7300, 7350, 7400, 7450, 7900, 7950 Also fits Riccar 8900, 8920, 8905, 8955, 8925 Models This carbon brush measures (just the carbon part) 3/8" X 1/4" and is about 1" in length out of the metal barrel when brand new.
The carbon brush frame (plastic - blue in picture) measures about 1 1/2" X 1/2" X 3/4"
These are sold individually!
OEM Part #D480-3000.
It is item #2 (includes #3-#6) shown in the picture.
This is the latch for the bag compartment door for the following Simplicity and Riccar vacuum cleaners: Riccar Brilliance Standard, Brilliance Deluxe, Brilliance Premium.
Simplicity Synchrony Standard, Synchrony Deluxe, Synchrony Premium.
OEM Part #SP10550.
DIMENSIONS: 11-1/4" X 6-3/4" X 6-3/4"
OEM Part #FC00011
This is the shoulder carrying strap for the Simplicity Sport and the FastVac FV-500.
OEM Part #C121-0000, A121-0200E It is item #22 and #25 in the picture. This is the gasket kit for the motor and fan duct cover for the Simplicity Freedom and Riccar Supralite vacuum cleaners. This kit includes two of the A121-0200E gaskets. Some times referred to as the Fan Duct Cover Felt Ring Seal or Motor Bracket Felt Ring Seal.
OEM Part #B455-0214B
Hose Inlet Cuff MV PV
This is the end piece for the attachment hose where it connects to the vacuum cleaner.
This will only work on models that have a .6 (dot 6) or later.
This fits the follow models:
This bag also fits the Riccar Brilliance, including models: SRLS, SRLD, BRLP (again - .6 or later).
This is the adaptor need to allow you to use standard 1 1/4 inch attachments with the Simplicity Prowler, Simplicity Scout, and Riccar Shadow.
OEM Part #BA00311
This is the attachment mounting bracket for the Simplicity Sport and the FastVac FV500
Genuine motor for Riccar 8955, 8850, Simplicity 7200, 7250, 7350, 7850. 12a, twin fan motor - Fit most ALL Simplicity and Riccar uprights that are twin (two) headlight style machines. OEM Part #D113-1700, C113-1700, B113-1700, A113-1700 This motor will fit the Riccar 8850 as well. That third wire shown in the picture is for the models that also had headlights that were wired into the motor. Some were wired that way and other were wired differently or had no headlights at all.
These bags fit the Riccar Sunburst, Riccar Moonlight Moon.1 and Riccar Sunbeam models. This bag is also the same bag as the Bissell 203-7270. Genuine HiFlow HEPA Bags - 6 Bags per pack. Also fits Simplicity Jack and Simplicity Jill model canisters.. OEM Part RZH-6 Also known as Simplicity Type Z Bags or Riccar Type Z Bags
Copyright © 1987-2017 VACSEW.COM