This is a standard 1.25" fit-all dusting brush.
It will fit most brands including all central vacuum systems as well as most Eureka, Hoover, Kenmore, Kirby, Simplicity, Riccar, and many other vacuum cleaners.
The bristles are a natural horse hair and boar bristle mix.
This is a unique adapter that measures about 4" long. It is slightly under 1 1/4" wide (outside diameter) at either end, but the taper-length is slightly different. On one end, the taper measures 2", and at the other end it measures 1 3/4". This allows this adapter to be used to allow some Hoover, Filter Queen, and Royal hoses to to able to use standard "fit-all" attachments that use the American 1 1/4" standard.
Approximate 1 1/4 to 35mm and is made of rigid plastic.VacPro Part #05.077, FA-4520
This 3.5-inch wide brush brush is perfect for dusting and vacuuming all kinds of surfaces and hard to reach places.
Bristles are one inch long and natural fiber.
Mini Blind Attachment
The Mini Blind Vacuum Attachment by Ideaworks is a faster and more effective method of cleaning mini blinds than messy wiping or dusting.
Unique vacuum fingers slide easily between mini blinds and suck up dust in seconds. Attaches easily to virtually any vacuum. Just slip the Mini Blind Vac Attachment onto the nozzle or hose of your vacuum and watch dust disappear.
This tool will fit most standard American Fit-All 1 1/4" attachment systems. It will not work with the European Systems without the use of this adapter.
Fit all upholstry tool. This tool is great for small clean-ups, sofas, cars, stairs, and chairs.
The removable bristle bar allows for more cleaning options.
Your attachment wand or hose end must measure 1 1/4" in outer diameter to be able to use this attachment.
Most Eureka, Kenmore, central vacuum systems will be able to use this tool.
This is a hand-held air-driven turbine brush that is great for stairs, upholstery, etc.
This will most all Eureka, Kenmore (canister), and most all central vacuum systems
Great for cleaning stairs, furniture, and cars. The 5.5-inch wide air driven non-electric beater brush is a must for every home. Also features clamp shell design to easily remove anything that gets jammed in it. Vacuum accessory for central vacuums, canisters, and uprights.
The hose/ wand connector is the standard 1.25 " connector common in the U.S.
The color and style may vary slightly from the picture shown here.
Photo courtesy of Modern Day Mfg.
Plastic wand - 18" long - Will work with most attachments systems on the market except Hoover. This is a standard 1 1/4" extension attachment wand for built-in central vacuum attachment systems. PLEASE NOTE: These wands are usually gray in color, but sometimes we can only get them in black.
Standard 1 1/4" fit-all metal extension attachment wand - friction fit attachment. Will work with most standard attachment systems and built-in central vacuum system attachment sets.
19 inches in length.
This is a fit-all bare floor tool with vinyl wheel and a natural bristle brush.
This tool is 10.5 inches (10.5") wide.
This tool will fit most all Eureka, Kenmore, Dirt Devil, Fuller Brush, as well as most all central vacuum (built-in vacuum) systems.
Fits Hoover uprights and Hoover bagless canisters which have 1 1/4" wands where the attachments fit OVER the wand or hose. Replaces part #43414142.
NOTE: This will NOT fit the Hoover Duros Canister.
PLEASE NOTE: Sometimes this bare floor tool is shipped out in gray or cream colored.
This is a fit-all (1 1/4") bare floor tool with vinyl wheels and a natural bristle brush. This tool is 14 inches (14") wide. This tool will fit most all Eureka, Kenmore, Dirt Devil, Fuller Brush, as well as most all central vacuum (built-in vacuum) systems. NOTE: Sometimes we get this tool in gray, ivory, and white.
This is a fit-all crevice tool that measures about 24 inches in length.
It will fit on most vacuum hoses and wands that measure 1 1/4 inches at the attachment end of the hose or wand.
You can flex this crevice tool in any direction as you insert it into tight cleaning places. It will not retain flexed shape.
Perfect for routine cleaning and maintaining of appliances - such as dryer vents or lint collectors, refrigerators, air conditioners, dryer vents, stoves, ovens, air ducts & vents, washers, radiators, condenser coils, and auto detailing.
It fits into areas over 11/16 X 1-3/16 inches and 21" deep.
VacPro Part #FB-05079
OEM Part #C351-1014. This is the three-in-one Dusting Brush / Upholstery Combination Tool for The Simplicity Cinch, Verve, Jessie Canister Vacuums This tool will fit all of the Riccar and Simplicity Full size canister vacuum cleaners as well as most Eureka, Electrolux and many other brands that have the standard 1 1/4 inch fit-all connection on the end of the hose. It is a reversible tool. One side can be used as an upholstery brush, flip the tool around and use it as a dusting brush. NOTE: The tool you will be getting is charcoal gray in color and MUCH nicer quality than the one shown.
Copyright © 1987-2017 VACSEW.COM